Projects
Energising Assets
HousingAI
About Us
Strategic Partners Aico CHIC HousingAI
Follow us on LinkedIn

Heating Budgets Set Winter Home Temperatures

17th November 2026

Jenny Danson

A free modelling tool shows social landlords how fabric, heating technology and tariff determine the indoor temperatures residents can afford this winter, and what that means for their health.

At a glance 

  • Gas is forecast at around 10p a kilowatt hour in January, possibly 11p, against just under 2p in 2016, with a typical annual bill forecast to rise from £1,700 to £2,200. 

  • A 70 square metre flat built to the Decent Homes Standard, with £25 a week for heating, reaches 15°C when it is 4°C outside and falls short of 18°C in 21 of the 30 weeks of the heating season. 

  • The same flat costs over £200 a week to heat if uninsulated and on direct electric heating, against £24.50 with insulation, a heat pump and a smart tariff.

Price rises arrive in the coldest months 

Gas is forecast at around 10p a kilowatt hour in January, possibly 11p. The best fixed rate available in 2016 was just under 2p. Nigel Banks forecasts that the typical annual bill under the Ofgem price cap will rise from £1,700 today to £2,200 in January, when heating demand is at its highest. 

Gas also sets the wholesale price of electricity for most of the year, so electricity rates rise with it, to around 30p to 35p a kilowatt hour. Changes this year to levies and VAT on electricity have narrowed the ratio of electricity to gas prices from nearly five to almost three. A heat pump with an efficiency of three delivers heat at around 10p a kilowatt hour, and at four around 7.5p. A gas boiler delivers it at 12p to 13p, and direct electric heating at 30p or more. 

The price cap limits unit rates, not total bills. Standing charges come first: on a prepayment meter, the first pound of each day's credit covers them before any heat is delivered. 

The typical bill is also lower than it appears. Ofgem reduced the typical usage figures on 1 July 2026, from 11,500 to 9,500 kilowatt hours of gas and from 2,700 to 2,500 kilowatt hours of electricity. The causes are warmer weather, efficiency improvements and households using less because of higher bills. The typical bill is also a median, so households with medical devices, older residents at home all day and families with young children often use considerably more.  

How the heating model works 

Nigel Banks, Technical Director (Zero Bills and Low Carbon Homes) at Octopus Energy, developed the tool with Healthy Homes Hub as a free resource for social landlords. It calculates the indoor temperature a household can reach from the size of the home, its heat loss, the heating system and tariff, the outside temperature and the weekly budget. Each of these can be changed, and a second view shows weekly costs across a 30 week heating season.  

A 70 square metre flat falls short of 18°C 

The worked example is a 70 square metre flat built to the Decent Homes Standard, with double glazing, loft and cavity wall insulation and a gas boiler. With £25 a week to spend on heating and 4°C outside, it reaches 15°C. 

Across the heating season, £25 a week is not enough to reach 18°C in 21 of 30 weeks. Reaching 18°C in the coldest weeks of December, January and February takes up to £40 a week. These figures cover heating only, with hot water and electricity on top. 

Households in this position are likely to heat one or two rooms, or only themselves.  

Temperature thresholds and health outcomes 

An indoor temperature above 18°C is considered safe. Below 16°C, the risk of respiratory illness rises, including asthma, COPD and infections, and so does the risk of damp and mould in the home. 

From 15°C down to 12°C, blood begins to thicken, raising the risk of heart attack and stroke. At 10°C to 12°C, hypothermia becomes a risk. Cold homes contribute to excess winter deaths, but death certificates record the heart attack, stroke or respiratory condition rather than the cold home. 

Awaab's Law extends to excess cold from 30 November 2026, alongside its existing requirements on damp and mould. Landlords therefore need to know which homes cannot be kept at a safe temperature on the budgets their residents have.  

Three variables landlords can influence 

The same flat costs over £200 a week to heat if it is uninsulated and uses direct electric heating. With insulation, a heat pump and a smart tariff, it costs £24.50. Residents have little control over these variables, and landlords have a great deal. 

Insulation gives resilience whatever heating system is installed. Heating technology and tariff can raise internal temperatures on the same budget without any fabric upgrade. Gas boilers run with very hot radiators, often to dry clothes, add 10% to 15% to heating costs. Storage heaters on flat rate tariffs are among the most expensive options, at 30p or more for every kilowatt hour. 

Fabric and technology are often debated as alternatives, particularly alongside decarbonisation targets. Both raise achievable temperatures, and which is more effective varies between homes. For Healthy Homes Hub, indoor temperature is a measurable health outcome that landlords can model for each property type before a cold snap, rather than assess after complaints arrive.  

Limits of the model 

The tool is a guide, not a prediction. Solar gains through south facing windows and heat from appliances raise temperatures above the modelled figures. Households that switch heating off, run out of prepayment credit or heat a single room will see temperatures below them. 

One cold week is enough to affect health, and budgets tighten as winter progresses. Cold snaps in February and March follow Christmas spending and a colder January, when many households have least to spend.  

Practical steps for housing providers 

Run the most common property types in the stock through the free tool to identify homes where a typical weekly heating budget does not reach 18°C: Thermal, Health and Price Cap Assessment Tool | Healthy Homes Hub

Target support at households with high energy needs, including those using medical devices, older residents and families with young children, before the first cold snap. 

Review homes with direct electric heating, storage heaters on flat rate tariffs and gas boilers running at high radiator temperatures, as these carry the highest cost per unit of heat. 

Compare fabric, heating technology and tariff options for each property type, because the lowest cost route to safe temperatures differs between homes. 

Include excess cold in winter planning alongside damp and mould, ahead of Awaab's Law extending to it on 30 November 2026. 

Send feedback on any additions that would make the tool more useful to landlords

Image credit: Adobe Stock

Unlock all content

This is the 2 of 3 articles you can access for free. Become a member to unlock unlimited access to our full content library.